pywidevine/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

1.4.2 - 2022-09-05

Changed

• Device's constructor no longer throws ValueError exceptions if it fails to parse the provided Client ID or it's VMP data if any. It will now raise a DecodeError.

Fixed

• Android Cdm Devices now use a Request ID formula similar to OEMCrypto library when generating a Challenge. This formula has yet to be fully confirmed and ironed out, but it is better than the Chrome Cdm formula.
• Various Proto Message Parsing now has full verification and expects the parsed response to be the same length as the serialized input, or it will throw an error. For example, this prevents vague errors to happen when you provide a bad License to Cdm.parse_license. It also prevents possibilities of it going past various other checks depending on the first few bytes provided.

1.4.1 - 2022-08-17

Small patch release for some fixes to the PSSH classes recent face-lift.

Changed

• PSSH.overwrite_key_ids static method is now an instance method named set_key_ids and works on the current instance instead of making and returning a new one.
• PSSH.get_key_ids static method is now a property method named key_ids. This allows swift access to all the Key IDs of the current access.
• PSSH.from_playready_pssh class method is now an instance method named playready_to_widevine and now converts the current instances values directly. This allows you to more easily instance as any PSSH, then convert afterwards.

1.4.0 - 2022-08-06

This release is a face-lift for the PSSH class with a moderate amount of Cdm and Serve interface changes.
You will likely need to make a moderate amount of changes in your client code, please study the changelog.

Please note that while it was always privatized as _sessions, accessing the Session directly for any purpose was never recommended or supported. With v1.4.0, there will be drastic problems if you continue to do so. One of the few reasons to do that was to get the license keys which is no longer required with CDMs new get_keys() method.

RemoteCdm minimum supported Serve API version is now v1.4.0.

Added

• The PSSH class now has a new() method to craft a new PSSH box. The box can be crafted from arbitrary init_data and/or key_ids. If only key_ids is supplied a new Widevine Cenc Header will be created and the key IDs will be put into it. This allows you to make compliant v0 or v1 boxes with as little data as just a Key ID.
• The PSSH class now has dump() and dumps() methods to serialize the data as binary or base64 respectively. It will be serialized as a pymp4 PSSH box, ready to be used in an MP4 file.
• Cdm now has a method get_keys() to get the keys of the loaded license. This is the alternative to manually accessing the keys by navigating the _sessions class instance variable.
• Serve API now also has a /get_keys endpoint to call the get_keys() method of the underlying Cdm session.

Changed

• Cdm and RemoteCdm now expect a PSSH object as the init_data param for get_license_challenge. You can no longer provide it anything else, that includes base64 or bytes form. It must be a PSSH object.
• Serve no longer returns license keys in the response of the /keys endpoint.
• Serve has changed the endpoint /challenge to /get_license_challenge and /keys to /parse_license. This is to be consistent with the method names of the underlying Cdm class.
• The PSSH class has been reworked from being a static helper class to a proper PSSH class.
• PSSH.from_playready_pssh is now a class method and returns as a PSSH object.

Removed

• PSSH.get_as_box has been removed and merged into the PSSH constructor.
• PSSH.from_key_ids has been removed entirely, you should now use PSSH.new(key_ids=...) instead.
• All uses of a local Session() object has been removed from RemoteCdm. The session is now fully controlled by the remote API and de-synchronization by external alteration or unexpected exceptions is no longer a possibility.

Fixed

• Various uses of the key_ids field of WidevinePsshData proto has been fixed in the PSSH class.
• Fixed a few Serve API crashes in edge cases with improved error handling on Cdm method calls.

1.3.1 - 2022-08-04

Added

• Cdm and RemoteCdm can now be supplied a string value for device_type for scenarios where providing it as a string is more convenient (e.g., from Config files).

Fixed

• The force_privacy_mode key no longer needs to be defined at all in the configuration file. This was previously crashing serve APIs if it wasn't set before starting.
• RemoteCdm's Server version check will no longer fail under certain serving conditions e.g., Caddy prepending Caddy to the Server header value. It also fixes case sensitivity and removed the full url from the header.

1.3.0 - 2022-08-04

Added

• New RemoteCdm class to be used as Client code for the serve Remote CDM API server. The RemoteCdm should be used entirely separately from the normal Cdm class. All serve APIs must update to v1.3.0 to be compatible. The RemoteCdm verifies the server version to ensure compatibility. Changes to the serve API schema will be immediately reflected in the RemoteCdm code in the future.
• Implemented /set_service_certificate endpoint in serve schema as an improved way of setting the service certificate than passing it to /challenge.
• You can now unset the service certificate by providing an empty service certificate value (or None or null). This includes support for doing so even in serve API and the new RemoteCdm.

Changed

• The Construction of the Cdm object has changed. You can now initialize it with more direct values if you don't want to use the Device class or don't want to use .wvd files. To use Device classes, you must now use the Cdm.from_device() class method.
• The ability to pass the certificate to /challenge has been removed. Please use the new /set_service_certificate endpoint before calling /challenge. You do not need to set it every time. Once per session is enough unless you now want to use a different certificate.

1.2.1 - 2022-08-02

This release is primarily a maintenance release for serve functionality but some Cdm fixes are also present.

Added

• You can now return all License Keys from Serve's /keys endpoint by supplying ALL as the key type. This adds support for Exchange Systems like Netflix's WidevineExchange MSL scheme. I recommend using ALL unless you only want CONTENT keys and will not be using any other type of keys including SIGNING and OPERATOR_SESSION.
• Serve now has a /close endpoint to close a session. The Cdm has a limit of 50 sessions per user.
• Serve now responds with a Server header denoting that pywidevine serve is being used, also specifying the version. This allows Clients to selectively support APIs based on version, and also verify the API as being supported at all.
• Serve now verifies that all Devices in config actually exist before letting you start serving.

Changed

• Downgraded lxml to >=4.8.0 to support projects using pycaption, which is likely considering the project's topic.
• All of Serve's endpoints now have a /{device} prefix. E.g., instead of /challenge/STREAMING, it's now /device_name/challenge/STREAMING. This is to support a multi-device per-user Cdm setup, see Fixed below regarding Serve's Cdm objects.

Fixed

• Fixed support for Raw PSSH values, e.g., Netflix's WidevineExchange MSL Scheme arbitrary init_data value.
• The Service Certificate is now saved to the Session in full SignedMessage form instead of just the underlying DrmCertificate. This is so any class inheriting the Cdm (e.g., for Remote capabilities) can sufficiently use and supply the service certificate while being signed.
• Serve's /open endpoint will now return a 400 error if there's too many sessions opened.
• Serve's Cdm objects with Device initialized are now stored per-user and device name. This fixes the issue where the entire user base has only 50 sessions available to be used. Effectively rate limiting to only 50 users at a time. Since /close endpoint was not implemented yet, there was no way to even close effectively meaning only 50 uses could be done.

1.2.0 - 2022-07-30

Added

• New CLI command serve to serve local WVD devices and CDM sessions remotely as a JSON API.
• The CLI command migrate can now accept a folder path to batch migrate WVD files.
• The Cdm now uses custom exceptions where the use case is justified. All custom exceptions are under a parent custom exception to allow catching of any Pywidevine exception.

Changed

• The Cdm has been reworked as a session-based Cdm. You now initialize the Cdm with just the device you wish to use, and now you open sessions with Cdm.open() to get a session ID. For usage example see license CLI command in main.py.
• The Cdm no longer requires you to specify raw bool parameter. It now supports arbitrary and valid Widevine Cenc Header Data without needing to explicitly specify which it is.
• The Cdm pssh param has been renamed as init_data. Doc-strings have been changed to prioritize explanation of it referring to Widevine Cenc Header rather than PSSH Boxes. This is to show that the Cdm more-so wants Init Data than a PSSH box. The full PSSH is never kept nor ever used, only it's init data is. It still supports PSSH box data.
• Cdm set_service_certificate() now returns the provider ID string rather than the underlying (and now verified) DrmCertificate. This is because the DrmCertificate is not likely useful and would still be possible to obtain in full but quick access to the Provider ID may be more useful.
• License responses can now be only be parsed once by Cdm.parse_license(). Any further attempts will raise an InvalidContext exception. This is because context data is now cleared for it's respective License Request once it's parsed to reduce data lingering in memory.
• Trove Classifier for Development Status is now 5 (Production/Stable).

Removed

• You can no longer provide a direct DrmCertificate to Cdm.set_service_certificate() for security reasons. You must provide either a SignedDrmCertificate or a SignedMessage containing a SignedDrmCertificate.
• PSSH from_init_data() has been removed. It was unused and is unnecessary with improvements to get_as_box().

Fixed

• Cdm set_service_certificate() now verifies the signature of the provided Certificate. This patches a trivial exploit/workaround that allows an attacker to recover the plaintext Client ID from an encrypted Client ID.
• Cdm parse_license() now verifies the input message type as a LICENSE message.
• Cdm parse_license() now clears context for the License Request once it's License Response message has been parsed. This reduces data lingering in the context dictionary when it may only be needed once.
• The Context Availability error handler in Cdm parse_license() has been fixed.
• Typing of type_ param of Cdm.get_license_challenge() has been fixed.

1.1.1 - 2022-07-22

Fixed

• The --vmp argument of the create-device command is now optional.

1.1.0 - 2022-07-21

Added

• Added support for setting a Service Certificate in SignedDrmCertificate form as well as raw DrmCertificate form. However, It's unlikely for the service to provide the certificate in raw DrmCertificate form without a signature.
• Added a CLI command create-device to create Widevine Device (.wvd) files from RSA PEM/DER Private Keys and Client ID blobs. You can also provide VMP (FileHashes) data which will be merged into the Client ID blob.
• Added a CLI command migrate that uses Device.migrate() and dump() to migrate older v1 Widevine Device files to v2.
• Added the v1 Structure of Widevine Devices for migration use.
• Added Device.migrate() class method that effectively loads older format WVD data. You can then use dumps() to get back the WVD data in the latest supported format.
• Added ability to use Privacy mode on the test command.

Changed

• Set Service Certificates are now stored as the raw underlying DrmCertificate as the signature data is unused by the CDM.
• Moved all Widevine Device structures under a Structures class.
• I removed the send_key_control_nonce flag from all Structures even though it was technically used. This is because the flag was never used as of this project, and I do not want to take up the flag slot.

Fixed

• Devices dump() function now uses the correct type_ parameter when building the struct.
• Fixed release date year of v1.0.0 and v1.0.1 in the changelog.

1.0.1 - 2022-07-21

Added

• More information to the PyPI meta information, e.g., classifiers, readme, some URLs.

Changed

• Moved the License Type parameter from the Cdm constructor to get_license_challenge().
• The Session ID is no longer used as the Request ID which could help with blocks or replay checks due to it being the same Session ID for each request. It's now a random 16 byte value each time.
• Only the Context Data of each license request is now stored instead of the full message.

Removed

• Removed unnecessary and unused raw Cdm class instance variable.

Fixed

• CDMs set_service_certificate() now correctly raises a DecodeError on Decode Error instead of a ValueError.
• Context Data will now always match to their corresponding License Responses. This fixes an issue where creating a second challenge would overwrite the context data of the first challenge. Parsing the first challenge after would result in either a key decrypt error, or garbage key data.

1.0.0 - 2022-07-20

Initial Release.