Don't append slash in CookieStorage::criteriaFind(). Append file
part of URI to request-uri in HttpRequest::createRequest(). This
change reverts the part of the previous change:"The
request-path must be ends with '/' so that request-path '/foo/'
path-matches cookie-path '/foo' and '/foo/' in the proposed
algorithm."
* src/CookieStorage.cc
* src/HttpRequest.cc
Supported ANSI C's asctime() format in Time::parseHTTPDate().
Added Time::parseAsctime(). Changed order of application of parse
functions. I could not remember why parseRFC850() was tried first.
* src/TimeA2.cc
* src/TimeA2.h
* test/TimeTest.cc
Use inet_ntoa if inet_ntop is not available. Since inet_ntoa does
not handle IPv6 address, IPv6 support is limited in this
case. Fixed unit test error under mingw32.
* configure.ac
* src/AsyncNameResolver.cc
* src/SocketCore.cc
* src/bittorrent_helper.cc
* test/BittorrentHelperTest.cc
* test/DHTMessageFactoryImplTest.cc
* test/DHTRoutingTableDeserializerTest.cc
* test/DHTRoutingTableSerializerTest.cc
* test/DefaultBtAnnounceTest.cc
* test/Metalink2RequestGroupTest.cc
* test/UTPexExtensionMessageTest.cc
Reverted the previous change in src/MultiUrlRequestInfo.cc.
Change log level of warning message about CA certificates to info.
* src/MultiUrlRequestInfo.cc
Removed warning message when CA certificates are not imported.
--ca-certificate and --check-certificate option were added to the
error message displayed when certificate verification failed.
* src/MultiUrlRequestInfo.cc
* src/message.h
Fixed compile error on OpenBSD4.7(i386). In openssl.m4, we first
search libcrypto and then libssl because libssl depends on
libcrypto on OpenBSD.
* src/Netrc.cc
* src/Netrc.h
* src/Triplet.h
* src/openssl.m4
Fixed the bug that FtpFinishDownloadCommand does not handle
timeout. This means it waits for the remote server to send "226
Transfer Complete" message *without* its own timeout until the
remote server shutdowns connection(we can detect EOF in this
case).
* src/AbstractCommand.h
* src/FtpFinishDownloadCommand.cc
Rewritten util::escapePath(). Now it does not replace bad chars:it
performs percent-encode against them. util::fixTaintedBasename()
now replaces "/" with "%2F". Added 0x7f as bad chars in
util::detectDirTraversal().
* src/util.cc
* test/UtilTest.cc
Non-UTF8 filenames are now percent-encoded. For example, filename
for http://example.org/%90%A2%8AE will be %90%A2%8AE because it is
Shift_JIS. The comments and name in .torrent file in XML-RPC
response are percent-encoded if they are not UTF-8.
* src/FtpNegotiationCommand.cc
* src/HttpRequestCommand.cc
* src/HttpResponseCommand.cc
* src/XmlRpcMethodImpl.cc
* src/bittorrent_helper.cc
* src/util.cc
* src/util.h
* test/BittorrentHelperTest.cc
* test/UtilTest.cc
Sort usedHosts by least used and faster download speed.
* src/Makefile.am
* src/RequestGroupMan.cc
* src/Triplet.h
* test/Makefile.am
* test/TripletTest.cc
Reset download start time of PeerStat because it is started before
file allocation begins. Without reset, we have incorrect download
time and aria2 wrongly determines that download speed is too low
if --lowest-speed-limit is used.
* src/StreamFileAllocationEntry.cc
Added keys parameter to aria2.tellStatus, aria2.tellActive,
aria2.tellWaiting and aria2.tellStopped XML-RPC method. 'keys' is
array of string. If it is specified, the response contains only
keys in 'keys' array. If 'keys' is empty or not specified, the
response contains all keys. This is useful when you just want
specific keys and avoid unnecessary transfers. For example,
*aria2.tellStatus*("1", ["gid", "status"]) returns 'gid' and
'status' key. Made get*Param() functions XmlRpcRequest's
methods and changed portions of the code that were affected by
this change.
* doc/aria2c.1.txt
* src/Makefile.am
* src/XmlRpcMethodImpl.cc
* src/XmlRpcMethodImpl.h
* src/XmlRpcRequest.cc
* src/XmlRpcRequest.h
* test/XmlRpcMethodTest.cc
Fixed the bug that a file gets overwritten if -V is given and no
hash is provided. Fixed the bug that --dry-run leads download
error. Added RequestGroup::createCheckIntegrityEntry() which
correctly creates CheckIntegrityEntry objects and open files based
on -V option and the existence of control file.
* src/AbstractCommand.cc
* src/AbstractCommand.h
* src/ChecksumCheckIntegrityEntry.cc
* src/DownloadContext.cc
* src/DownloadContext.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/PieceHashCheckIntegrityEntry.cc
* src/RequestGroup.cc
* src/RequestGroup.h
* src/RequestGroupEntry.cc
* src/RequestGroupEntry.h
Added short option -k for --min-split-size option and -x for
--max-connection-per-server option. Raised maximum value of
--max-connection-per-server up to 16.
* src/OptionHandlerFactory.cc
* src/usage_text.h
Use uri::parse instead of Request::setUri() where just URI parser
is needed.
* src/AbstractCommand.cc
* src/AdaptiveURISelector.cc
* src/DefaultBtAnnounce.cc
* src/FeedbackURISelector.cc
* src/FileEntry.cc
* src/HttpResponseCommand.cc
* src/ProtocolDetector.cc
* src/Request.cc
* src/RequestGroupMan.cc
Moved URI parser code to uri.h, uri.cc to provide fast URI parser
without Request object initialization.
* src/Makefile.am
* src/Request.cc
* src/uri.cc
* src/uri.h
* test/Makefile.am
* test/RequestTest.cc
* test/UriTest.cc
Added --max-download-result=NUM option. This option sets maximum
number of download result kept in memory. The download results are
completed/error/ removed downloads. The download results are
stored in FIFO queue and it can store at most NUM download
results. When queue is full and new download result is created,
oldest download result is removed from the front of the queue and
new one is pushed to the back. Setting big number in this option
may result high memory consumption after thousands of
downloads. Specifying 0 means no download result is kept. Default
value is 1000.
* src/OptionHandlerFactory.cc
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Check hash(hash for entire file, not piece hash) if
--check-integrity option is given and file is
downloaded(determined by file length). If it fails, re-download
file.
* src/AbstractCommand.cc
* src/ChecksumCheckIntegrityEntry.cc
* src/ChecksumCheckIntegrityEntry.h
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/RequestGroup.cc
Moved connectedHostname, connectedAddr and connectedPort to
Request object. Mark cached IP address bad on timeout to allow
aria2 to renew IP address cache.
* src/AbstractCommand.cc
* src/AbstractProxyRequestCommand.cc
* src/AbstractProxyRequestCommand.h
* src/FtpInitiateConnectionCommand.cc
* src/FtpNegotiationCommand.cc
* src/FtpNegotiationCommand.h
* src/HttpInitiateConnectionCommand.cc
* src/HttpRequestCommand.cc
* src/HttpRequestCommand.h
* src/InitiateConnectionCommand.cc
* src/InitiateConnectionCommand.h
* src/Request.cc
* src/Request.h
Fixed the bug that aria2 reports error and exits with non-zero
status when file is already downloaded.
* src/FtpNegotiationCommand.cc
* src/HttpResponseCommand.cc
* src/RequestGroup.cc
Allow '@' in username and password embedded in URI. It should be
percent-encoded but many people use their mail address as an
username and forget about PE.
* src/Request.cc
* test/RequestTest.cc
Added a sets of overloaded functions for
PieceStorage::getMissingPiece() and getMissingFastPiece() to get
multiple pieces more efficiently.
* src/DefaultBtInteractive.cc
* src/DefaultPieceStorage.cc
* src/DefaultPieceStorage.h
* src/PieceStorage.h
* src/UnknownLengthPieceStorage.cc
* src/UnknownLengthPieceStorage.h
* test/DefaultPieceStorageTest.cc
* test/MockPieceStorage.h
Don't listen on IPv6 socket for BitTorrent, DHT, XML-RPC if
--disable-ipv6 is true.
* src/BtSetup.cc
* src/DownloadEngineFactory.cc
* src/RequestGroup.cc
Enter end game mode as soon as all pieces are assigned to peer to
avoid substantial slow down at the very last stage of download.
* src/DefaultBtInteractive.cc
* src/DefaultPieceStorage.cc
* src/DefaultPieceStorage.h
* src/PieceStorage.h
* src/UnknownLengthPieceStorage.h
* test/MockPieceStorage.h
Added --bt-tracker and --bt-exclude-tracker option. In
--bt-tracker option, you can specify comma separated list of
additional BitTorrent tracker's announce URI. These URIs are not
affected by --bt-exclude-tracker option because they are added
after URIs in --bt-exclude-tracker option are removed. In
--bt-exclude-tracker option, you can specify comma separated list
of BitTorrent tracker's announce URI to remove. You can use
special value '*' which matches all URIs, thus removes all
announce URIs. When specifying '*' in shell command-line, don't
forget to escape or quote it.
* src/BtDependency.cc
* src/OptionHandlerFactory.cc
* src/UTMetadataPostDownloadHandler.cc
* src/bittorrent_helper.cc
* src/bittorrent_helper.h
* src/download_helper.cc
* src/download_helper.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/BittorrentHelperTest.cc
* test/DownloadHelperTest.cc
Added --enable-async-dns6 option. This option enables IPv6 name
resolution in asynchronous DNS resolver. This option will be
ignored when --async-dns=false.
* doc/aria2c.1.txt
* src/AbstractCommand.cc
* src/AsyncNameResolver.cc
* src/AsyncNameResolver.h
* src/DHTEntryPointNameResolveCommand.cc
* src/OptionHandlerFactory.cc
* src/download_helper.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
Added FTP EPSV and EPRT command support. aria2 issues these
commands when address family of local socket is AF_INET6.
* src/FtpConnection.cc
* src/FtpConnection.h
* src/FtpNegotiationCommand.cc
* src/FtpNegotiationCommand.h
* src/SocketCore.cc
* src/SocketCore.h
* test/FtpConnectionTest.cc
Fixed the bug that if hostname is numeric,
AbstractCommand::resolveHostname() does not add its address to
given addrs. This makes pooled socket is not used for that
address.
* src/AbstractCommand.cc
Set milliseconds in DownloadEngine::refreshInterval_. Because
there is difference in accuracy between epoll and clock_gettime(),
we set DEFAULT_REFRESH_INTERVAL 900ms just lower than default
timeout 1 sec for epoll. Also set update interval of
ConsoleStatCalc to 900ms by the same reason.
* src/ConsoleStatCalc.cc
* src/DownloadEngine.cc
* src/DownloadEngine.h
Fixed the bug that HAVE_SOME_FALLOCATE gets undefined if fallocate
is not available even if posix_fallocate is available. This causes
FallocFileAllocationIterator.cc is out of compile targets and
linker error.
* configure.ac
Added max-connection-per-server, min-split-size and
conditional-get option to -i list option and aria2rpc.
* doc/aria2c.1.txt
* doc/xmlrpc/aria2rpc
* src/download_helper.cc
Count the number of command used in HTTP(S)/FTP and the number of
connections in HTTP(S)/FTP independently. The former is used to
determin whether additional command is needed. The latter is used
to report user to how many connections are used in a download.
* src/AbstractCommand.cc
* src/AbstractCommand.h
* src/CreateRequestCommand.cc
* src/RequestGroup.cc
* src/RequestGroup.h
Added --on-bt-download-complete=COMMAND option. For BitTorrent, a
command specified in --on-download-complete is called when
download completes and seeding is over. On the other hand, this
option set the command to be executed when download completes but
before seeding.
* doc/aria2c.1.txt
* src/DefaultPieceStorage.cc
* src/OptionHandlerFactory.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* src/util.cc
* src/util.h
Added --conditional-get option. Download file only when the local
file is older than remote file. This function only works with
HTTP(S) downloads only. It does not work if file size is specified
in Metalink. It also ignores Content-Disposition header. If a
control file exists, this option will be ignored. This function
uses If-Modified-Since header to get only newer file
conditionally. When getting modification time of local file, it
uses user supplied filename(see --out option) or filename part in
URI if --out is not specified.
* doc/aria2c.1.txt
* src/HttpHeader.cc
* src/HttpHeader.h
* src/HttpRequest.cc
* src/HttpRequest.h
* src/HttpRequestCommand.cc
* src/HttpResponse.cc
* src/HttpResponseCommand.cc
* src/OptionHandlerFactory.cc
* src/TimeA2.cc
* src/TimeA2.h
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/HttpResponseTest.cc
* test/TimeTest.cc
Added --min-split-size=SIZE option. aria2 does not split less
than 2*SIZE byte range. For example, let's consider downloading
20MiB file. If SIZE is 10M, aria2 can split file into 2 range
[0-10MiB) and [10MiB-20MiB) and download it using 2 sources(if
--split >= 2, of course). If SIZE is 15M, since 2*15M > 20MiB,
aria2 does not split file and download it using 1 source.
* src/BitfieldMan.cc
* src/BitfieldMan.h
* src/DefaultPieceStorage.cc
* src/DefaultPieceStorage.h
* src/OptionHandlerFactory.cc
* src/RequestGroup.cc
* src/prefs.cc
* src/prefs.h
* src/usage_text.h
* test/BitfieldManTest.cc
* test/SegmentManTest.cc
FeedbackURISelector now tries to chooses URI which is not used in
aria2 globally. If it is possible, it may return used URI.
* src/AdaptiveURISelector.cc
* src/AdaptiveURISelector.h
* src/CreateRequestCommand.cc
* src/FeedbackURISelector.cc
* src/FeedbackURISelector.h
* src/FileEntry.cc
* src/FileEntry.h
* src/InOrderURISelector.cc
* src/InOrderURISelector.h
* src/RequestGroupMan.cc
* src/RequestGroupMan.h
* src/URISelector.h
* test/FeedbackURISelectorTest.cc
* test/InOrderURISelectorTest.cc
