A guide to mkvmerge GUI (mmg)

The only thing that mmg needs to know is the location of the mkvmerge binary. Under normal circumstances it will be found automatically. But if not then you can select the binary to use on the Settings tab.

When mmg starts up it shows the first and probably most important tab: the input tab. Here you see four different elements. The topmost input box lists all input files. Directly under this box are options that apply to the currently selected input file.

The two buttons to the right of the upper list box can be used to add files to the list box with the add button and to remove the selected entry with the remove button.

Once the user has added at least one input file in the upper list box the second list box will contains all available tracks. Each track is ENabled by default and will be muxed into the resulting file. However, you can change that by simply clicking on the check box right in front of the track's name in the second list box. For each of these tracks the user can select track specific options with the input boxes and check boxes below the track listing. These options will be described in the following sections.

To the right of the track list box there are two buttons with which you can control the order of the tracks in the output file. By hitting the up and down the currently selected track is moved in the appropriate direction.

• Language: The user can select the language for each track regardless of its type. This language is coded in the ISO639-2 language code. The drop-down box contains all ISO639-2 codes so the user does not have to worry about selecting the wrong language code.
• Track name: The user can set a name for the current track. This name is a free-form string. Practical examples could be 'director's comments' or 'great view of Seattle'. Note that these names are not meant to contain the movie title!
• Cues: The cues are for Matroska what the index is for AVI files. They contain links to the key frames. Usually this option should be left on the value 'default'. mkvmerge will automatically chose the best method for any given track type. A full explanation of tracks can be found in mkvmerge's documentation.
• FourCC: Matroska does not normally store the Four-CC which is used in other containers to identify the codec used. Matroska has its own format, called CodecID, but it also has an AVI compatibility mode. In this mode the FourCC is also stored. With this option the FourCC can be forced to a different value. However, you cannot change the CodecID used by mkvmerge.
  This option is only available for video tracks.
• Aspect ratio: With this option the user can set the aspect ratio that should be used upon playback. It defaults to the aspect ratio that the movie was encoded with but can be changed, e.g. for anamorphic encodings. The GUI expects the format to be either a floating point number (e.g. '2.33') or a fraction (e.g. '16/9').
  Another possibility is to set the values for the display width and display height manually. This can come in handy if you want to adjust the parameters to a specific resolution. If you specify the aspect ratio then mkvmerge will calculate the display dimensions based on the size of the video track.
  This option is only available for video tracks.
• Delay (in ms): In some cases audio and video are not synchronized properly. With this option the user can offset the audio track by a given amount, either positive or negative. mkvmerge will either remove samples at the beginning or insert silence at the beginning to adjust the track.
  This option is available for audio and text subtitle tracks.
• Stretch by: In some cases audio and video slowly drift apart during playback. This can be fixed by supplying a factor of how much the time codes should be stretched by mkvmerge. If nothing is given then '1.0' is assumed which does not alter the time codes. Please note that this option has not been implemented for all audio track types yet.
  This option is available for audio and text subtitle tracks.
• Subtitle charset: Some text subtitle formats do not store the charset that they were created with. This is important because text subtitles are automatically converted to the UTF-8 charset during muxing. mkvmerge will normally assume that the system's current charset is the same that the subtitle file was written in. But in case this is not true the user can select the correct charset.
  This option is only available for text subtitle tracks.
• Compression: Matroska features a powerful system for compressing tracks with lossless compression algorithms. Those compressions can be applied to any given track, but some players only support this for VobSub tracks. This is where it's most useful. Other tracks, especially audio and video tracks, are already compressed so that additional compression will not yield any result. For VobSubs you can achieve an additional gain of about 30% if you enable zlib compression. That's why it is the default for VobSub tracks.
  You should just leave this setting at default.
• Make default track: Matroska knows a flag which tells the player that a specific track should be preferred upon playback if the user does not chose another one. Of course each track type has its own default track - e.g. the default audio track is the English one, and the default subtitle track is the French one. If no track is set to be the default track then mkvmerge will promote the first track of each type that it finds to be the default track. This is consistent with the behavior of various media players.
• AAC is SBR/HE-AAC/AAC+: The new technology called 'high efficiency AAC' has some drawbacks when it is being stored in .AAC files: it is not possible to detect the HE-AAC part for these files. Therefore the user has to check this option manually if it applies. Please note that this problem does not exist for HE-AAC stored in .MP4 files.
• Tags: For each track you can create a XML tags file. For a full explanation of all tags please refer to the example file and mkvmerge's own documentation. In probably 99% of all cases you want to use THIS option and associate tags with a specific track. The tags option on the global tab is probably not what you need.

Typical options for a video track

Typical options for an audio track

Typical options for a text subtitle track

Matroska files can also contain other files, called attachments. This works basically just like with your favorite email program. The idea is to provide additional information about the file. Some examples could be cover photos for a CD rip, additional background information in text form about the movie or even some compressed fonts for the subtitles.

Every attachment needs two things: the file name (obviously) and the MIME type that should be associated with the file. The usage is very easy and similar to adding files on the input tab.

On the second tab of the GUI, the attachment tab, you can add a file with the + button and remove the selected attachment with the - button. Once an attachment has been selected the other controls on this tab will be available. You do have to select a MIME type for each attachment, but the description is optional - although it is a good idea to always provide a description. This makes it easier for others to identify what you've attached to this Matroska file.

The last option, attachment style, is only evaluated when you also split the output into several files. (Splitting in general is explained in the following section.) If the option To all files is selected then the current file will be attached to all output files created. If the option Only to the first is selected then the file is only attached to the very first output file created.

Add and remove attachments with these buttons.

Typical options for an attachment

3.5.1. File/segment title

File/segment title: This title is used for the actual movie title, e.g. 'Vanilla Skies'.

Selecting a title for the movie

3.5.2. Automatic splitting and file linking

The Split section handles how the output file is split into several smaller files. If no splitting is selected then only one big file is generated. If splitting is activated then you can tell mkvmerge to start a new output file after either a specific amount of data has been written to the current file or after a specific amount of time has accumulated. The formats accepted are:

• For the size: A number optionally followed by the letter 'K', 'M' or 'G' indicating kilobytes (1024 bytes), megabytes (1024 * 1024 bytes) or gigabytes (1024 * 1024 * 1024 bytes). Examples: '700M' or '100000K'.
• For the time: The format is either HH:MM:SS or a number followed by the letter 's' indicating a number of seconds. Examples: '01:20:00' (split after 1 hour, 20 minutes) or '1800s' (split after 1800 seconds = 30 minutes).

Don't link: This option controls how mkvmerge will handle splitting. A little explanation about this feature:

Matroska supports file linking which simply says that a specific file is the predecessor or successor of the current file. To be precise, it's not really the files that are linked but the Matroska segments. As most files will probably only contain one Matroska segment I simply say 'file linking' although 'segment linking' would be more appropriate.

Each segment is identified by a unique 128 bit wide segment UID. This UID is automatically generated by mkvmerge. The linking is done primarily via putting the segment UIDs of the previous/next file into the segment header information. mkvinfo prints these UIDs if it finds them.

If a file is split into several smaller ones and linking is used then the time codes will not start at 0 again but will continue where the last file has left off. This way the absolute time is kept even if the previous files are not available (e.g. when streaming). If no linking is used then the time codes should start at 0 for each file. By default mkvmerge does not use file linking because some players still don't handle linked files properly. If you want linking that you can turn it on by enabling this link files check box.

3.5.3. Manual file/segment linking

Regardless of whether splitting is active or not the user can tell mkvmerge to link the produced files to specific UIDs. This is done by entering a valid segment UID into the two input boxes, Previous segment UID and Next segment UID. These options accept a segment UID in the format that mkvinfo outputs: 16 hexadecimal numbers between 0x00 and 0xff prefixed with '0x' each and separated with spaces, e.g. 0x41 0xda 0x73 0x66 0xd9 0xcf 0xb2 0x1e 0xae 0x78 0xeb 0xb4 0x5e 0xca 0xb3 0x93. Alternatively a shorter form can be used: 16 hexadecimal numbers between 0x00 and 0xff without the '0x' prefixes and without the spaces, e.g. 41da7366d9cfb21eae78ebb45ecab393.

If splitting is used then the first file is linked to the UID given in the Previous segment UID input box, and the last file is linked to the UID given in the Next segment UID input box. If splitting is not used then the one output file will be linked to both of the two UIDs.

3.5.4. Chapters

With the browse button you can select the chapters to add to the output file. A full explanation of all aspects around chapters can be found in the Chapter editor section.

3.5.5. Global tags

Unlike the tags you can select for each track on the input tab the tags selected here have to contain the track UIDs. These tags are not assigned to any track automatically. In 99% of all cases this is NOT the option you want to use!

The full explanation can be found in mkvmerge's documentation.

Typical options for splitting. Create two files which will be approx. 700megs big.

Once everything has been set up the muxing process can be started. The last thing to do is to chose where to mux to. With the browse button you can select the output file. After this has been done hit the Start muxing button or select the same entry from the Muxing menu.

If everything has been set up correctly mmg will show the muxing dialog. The progress is shown at the top, as is a general description of what mkvmerge is doing at the moment.

mkvmerge knows three different 'severity levels' for its messages: status reports, warnings and errors. All status report messages are shown in the upper window. These include the track types encountered and other interesting things.

Warnings are shown in the middle window. mkvmerge will not abort when it issues a warning, but it might stop muxing the track for which the warning was printed. You should pay close attention to all warning messages.

Errors are show in the lower window. Errors are always fatal, and mkvmerge will stop muxing right after it has printed the error message. Such a message might be that the hard disc is full or that the source file is damaged and cannot be processed any further.

The button Abort sends mkvmerge the signal to stop muxing. Unless mkvmerge is stuck in some endless loop it will stop soon after you've pressed the button. With Save log you can save the complete output from mkvmerge into a text file for further study or in case you've encountered a bug and want to send me some additional information.

The muxing window

Each job has six attributes: an ID which is automatically chosen my mkvmerge GUI; its status (pending - it hasn't been muxed yet, done - muxing has completed successfully, done with warnings - muxing has completed successfully but there were warnings, failed - the muxing process failed); the name that you've entered before; the time and date on which the job was added to the job queue; the time and date when the muxing process was started for this job and the time and date when the muxing process finished.

The general controls are located at the bottom. The Start button will start the muxing process for all jobs whose status is pending. The Start selected button will start the muxing process for all jobs that are currently selected independent of their status.

The buttons on the right manipulate all selected jobs. The Up and Down move the selected jobs up and down in the list. The Re-enable button sets the jobs' status to pending so that they will be started the next time the Start button is pressed. The Disable button will set the status to done.

During the muxing process mkvmerge's output will not be shown but saved. If you want to see a job's output you can hit the View log button. This is useful if a job completed with warnings or if it failed completely.

The job management dialog

The chapter editor consists of three parts: the tree view of all chapters, the four buttons used for adding and removing chapter entries, and the input boxes which are used for setting the chapter entry's data.

In Matroska files one chapter is defined by having a start time, a name and a language that is associated with that name. You can have several names for one chapter and each associated with a different language. You may also add an end time, but that is not mandatory.

A new chapter file is started with the New option from the Chapter editor menu. You can add a new chapter with the Add chapter or Add subchapter buttons. The difference between these two buttons is that when a chapter has been selected Add chapter will append a new chapter directly after the selected chapter on the same level, and Add subchapter will add a new chapter as the last child of the currently selected chapter.

The Remove chapter has to be used with care. It removes the complete subtree without asking for confirmation, and there is no undo option available at the moment.

After selecting a chapter entry you can change its data. The format for the start and end time are either HH:MM:SS.mmm or simply HH:MM:SS. One chapter name will already have been added. You can edit it and select the language that this name is given in. This way you could provide names in several languages, e.g. 'The hero arrives' with 'eng' as the language and 'Der Held kommt an' with 'ger' as the language. Just hit the Add name button if you need more entries and Remove name in order to get rid of one.

Creating many chapters and always changing the language can be quite some work. Therefore you can select which language and country tags mmg should add by default with the Set default values menu entry in the Chapters menu. The Set values button does something similar. With it you can apply a language and/or country to the currently selected entry and all its children.

Saving chapters to XML files can be done with Save or Save as. Save as cannot be used to write chapters to an existing Matroska file - you'll have to use Save to Matroska file for that.

The chapter editor showing the example from above